Technical Data; Defi Nitions: Safety Guidelines; Ec Declaration Of Conformity - DeWalt D26480 Traduction De La Notice D'instructions Originale

BELT SANDER D26480
Congratulations!
You have chosen a D WALT tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.

Technical Data

Voltage
(U.K. & Ireland only)
Type
Power input
Belt speed m/min
Sanding surface
Belt length
Belt width
Weight
L (sound pressure) dB(A)
PA
K (sound pressure uncertainty) dB(A)
PA
L (sound power) dB(A)
WA
K (sound power uncertainty) dB(A)
WA
Vibration total values (triax vector sum) determined according to
EN 60745:
Vibration emission value a
h
a = m/s²
h
Uncertainty K = m/s²
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off
or when it is running but not actually
doing the job. This may significantly
reduce the exposure level over the total
working period.
Fuses
Europe
D26480
U.K. & Ireland
V 230
U.K. & Ireland
V 230/115
1
Defi nitions: Safety Guidelines
W 500
The definitions below describe the level of severity
365
for each signal word. Please read the manual and
mm 64 x 80
pay attention to these symbols.
mm 356
mm 64
kg 2.4
84
3
91
4.9
3.3
1.5
EC-Declaration of Conformity
MACHINERY DIRECTIVE
D26480
D
E
under "technical data" are in compliance with:
2006/42/EC, EN 60745-1, EN 60745-2-4.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
230 V tools
230 V tools
115 V tools
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
Denotes risk of explosion
WALT declares that these products described
EN GL IS H
10 Amperes, mains
13 Amperes, in plugs
16 Amperes, in plugs
21