DAB AQUATWIN TOP 132 Instructions Pour L'installation Et La Maintenance page 47

N.B. The pipes must be separate, one for each tank.
Settings and functions of the management control unit
FUNCTION Function description
Function selection buttons
Using the (
desired function on the screen.
In "1TANK" function the system is managed by a single float placed in the tank, EV1 and EV2 manage suction at the
same time, managing rain water or mains water.
In "2TANKS" function the system is managed by two floats placed autonomously in the storage tanks; depending on
the presence or absence of rain water, EV1 and EV2 are managed autonomously; in this mode there may be a
mixed use of the two water reserves (rain water and mains water).
The (
The button stops the buzzer, but the "OVERFLOW ALARM" signal continues blinking until the float inside the storage
tank returns to optimum position.
The (
operation or to manage manual filling of the mains water storage tank; as a standard feature this solenoid valve is
controlled automatically by a float (G3) located inside the tank.
The (
water) when rain water is present in the storage tanks
!!NB. this operation allows the changing of the water present in the mains water storage tank; it is recommended to
use this function once a week to guarantee the changing of the water.
Indication of P1 operation in "RAIN WATER" mode; in this mode pump one takes the water from the rain water tank.
Indication of P2 operation in "RAIN WATER" mode; in this mode pump two takes the water from the rain water tank.
Indication of P1 operation in "MAIN WATER" mode; in this mode pump one takes the water from the mains water
tank. In this mode the messages blink to highlight the consumption of drinking water.
) button, select the one or two TANK/TANKS function, pressing this button repeatedly will display the
) button stops the buzzer which indicates the overflow alarm.
) button manually activates the solenoid valve "EV3"; this function allows you to test the solenoid valve
) button activates the "MAN MAIN" function; this function allows you to force operation in MAIN mode (mains
ENGLISH
45