Maintenance
Inspection
•
Inspect the RBSS periodically to ensure that it can rotate freely about the pivot pin
or cross bar.
•
Inspect the proximity switch area periodically and remove any material build-up.
Unit Repair and Excluded Liability
All changes and repairs must be done by qualified personnel and applicable safety
regulations must be followed. Please note the following:
•
The user is responsible for all changes and repairs made to the device.
•
All new components must be provided by Siemens Milltronics Process Instruments Inc.
•
Restrict repair to faulty components only.
•
Do not re-use faulty components.
7ML19985GX63
RBSS Speed Sensor – INSTRUCTION MANUAL
Page EN-7