Initial Use - Beurer Janosch JIH50 Mode D'emploi

6

Initial use

Before using the device for the first
time
Note:
• Before first use, the nebulizer and the
accessories should be cleaned and di-
sinfected. For more information, see
page 29.
Assembly
Remove the device from the packaging.
• If not already fitted, fit the mesh nebu-
lizer (3) onto the neck of the container
(2), and lock the neck in place by turn-
ing it clockwise until the gold-coloured
contact electrodes are facing down-
wards.
• Place the container with fitted mesh
firmly onto the housing (6) or base of
the device, so that you hear it click into
place on the left and right.
• Insert the batteries.
Inserting the batteries
• To open the battery compartment (7) on
the underside of the device, apply light
pressure and pull the battery compart-
ment cover in the direction of the ar-
rows, then fold the lid up.
• Insert four batteries (type AA LR6).
• Ensure that the poles of the batteries
are touching their respective poles in
the device (see illustration on the bot-
tom of the casing).
• Fold the battery compartment lid down
again and push it back in place, in the
opposite direction to the arrows.
Note:
• When changing batteries, ensure that
the medicine container is completely
empty, otherwise there is a risk of leaks.
• When the orange LEDs (4) light up, re-
place all four batteries, because spray-
ing becomes much less effective when
batteries are weak.
• You can operate the device for approx.
180 minutes with new alkaline batteries.
• This is sufficient for 5 - 9 applications
of saline solution (depending on the
dose and duration of each applica-
tion).
26
15