Firmware Version; Reset Functions - ACME Xperior XP 15R SZ Notice D'utilisation

 Fixture Use Time
Select Fixture Use Time, press the ENTER button to confirm, fixture use time will show on the display,
press the MENU button to exit.
 Lamp On Time
Select Lamp On Time, press the ENTER button to confirm, lamp on time will show on the display, press
the ENTER button to confirm, use the UP and DOWN button to select Exit or Reset Time, press the
ENTER button to confirm. Press the MENU button back to the last menu or exit menu mode idling one
minute.
 Firmware Version
Select Firmware Version, press the ENTER button to confirm, firmware version will show on the
display, press the MENU button back to exit.
G. Reset Functions
Enter menu mode, select Reset Function, press the ENTER button to confirm, use the UP and DOWN
button to select Pan/Tilt, Shutter, Color/CMY, Gobo/Iris, Focus/ Zoom/Frost / Prism or All.
 Pan/Tilt—Reset Pan/Tilt
Select Pan/Tilt, press the ENTER button to confirm, use the UP and DOWN button to select Yes (the unit
will run built-in program to reset pan and tilt to their home positions) or No, press the ENTER button to
store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.
 Shutter—Reset Shutter
Select Shutter, press the ENTER button to confirm, use the UP and DOWN button to select Yes (the unit
will run built-in program to reset shutter to their home positions) or No, and press the ENTER button to
store. Press the MENU button to exit.
 Color/CMY—Reset Color/CMY
Select Color/CMY, press the ENTER button to confirm, use the UP and DOWN button to select Yes (the
unit will run built-in program to reset color and CMY to their home positions) or No, and press the
ENTER button to store. Press the MENU button to exit.
 Gobo/Iris—Reset Gobo/Iris
Select Gobo/Iris, press the ENTER button to confirm, use the UP and DOWN button to select Yes (the
unit will run built-in program to reset Gobo wheel and Iris to their home positions) or No, press the
ENTER button to store. Press the MENU button to exit.
 Focus/Zoom /Frost/Prism—Reset Focus/Zoom /Frost/Prism
Select Focus/Zoom/Frost/Prism, press the ENTER button to confirm, use the UP and DOWN button to
select Yes (the unit will run built-in program to reset zoom, frost and frost to their home positions) or No,
and press the ENTER button to store. Press the MENU button to exit.
 All—Reset All
Select All, press the ENTER button to confirm, use the UP and DOWN button to select Yes (the unit will
run built-in program to reset all motors to their home positions) or No, press ENTER button to store. Press
the MENU button to exit.
36