Display Setting; Backlight Intensity; Fixture Test; Fixture Information - ACME Xperior XP 15R SZ Notice D'utilisation

D. Display Setting
Enter menu mode, select Display Setting, press the ENTER button to confirm, use the UP and DOWN
button to select Display Inverse, Backlight Auto Off, Backlight Intensity or Temperature Unit and
Language.
 Display Inverse
Select Display Inverse, press the ENTER button to confirm, present mode will blink on the display, use
the UP and DOWN button to select No (normal display) or Yes (inverse display), press the ENTER button
to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.
 Backlight Auto Off
Select Backlight Auto Off, press the ENTER button to confirm, present mode will blink on the display,
use the UP and DOWN button to select No (display always on) or Yes (display goes off one minute after
exiting menu mode), press the ENTER button to store. Press the MENU button back to the last menu or let
the unit idle one minute to exit menu mode.
 Backlight Intensity
Select Backlight Intensity, press the ENTER button to confirm, present mode will blink on the display,
use the UP and DOWN button to adjust backlight intensity from 1 (dark) to 10 (bright), press the ENTER
button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu
mode.
 Temperature Unit
Select Temperature Unit, press the ENTER button to confirm, present mode will blink on the display, use
the UP and DOWN button to select ℃ or ℉, press the ENTER button to store. Press the MENU button
back to the last menu or let the unit idle one minute to exit menu mode.
 Language: function not available: English only
E. Fixture Test
Enter menu mode, select Fixture Test, press the ENTER button to confirm, use the UP and DOWN button
to select Auto Test or Manual Test
 Auto Test
Select Auto Test, press the ENTER button to confirm, the unit will run built-in programs to automatically
test pan, tilt, shutter, color, CMY, gobo, gobo rotation, prism, prism rotation, iris, frost, zoom, focus,
dimmer, flat and lamp on/off. Press the MENU button back to the last menu or exit menu mode after auto
test.
 Manual Test
Select Manual Test, press the ENTER button to confirm, the present channel will show on the display,
use the UP and DOWN button to select channel, press the ENTER button to confirm, then use the UP and
DOWN button to adjust the value, press the ENTER button to store, the fixture will run as the channel
value indicates. Press the MENU button back to the last menu or exit menu mode idling one minute.
(All channels value will become 0 after exiting Manual Test menu)
F. Fixture Information
Enter menu mode, select Fixture Information, press the ENTER button to confirm, use the UP and
DOWN button to select Fixture Use Time, Lamp On Time or Firmware Version.
35