Fixture Setting; Lamp Setting - ACME Xperior XP 15R SZ Notice D'utilisation

B. Fixture Setting
Enter menu mode, select Fixture Setting, press the ENTER button to confirm, use the UP and DOWN
button to select Pan Inverse, Tile Inverse, P/T Feedback, BL.O. P/T Moving, BL.O. Color Change or
BL.O. Gobo Change.
 Pan Inverse
Select Pan Inverse, press the ENTER button to confirm, present mode will blink on the display, use the
UP and DOWN button to select No (normal) or Yes (pan inverse), press the ENTER button to store. Press
the MENU button back to the last menu or let the unit idle one minute to exit menu mode.
 Tilt Inverse
Select Tilt Inverse, press the ENTER button to confirm, present mode will blink on the display, use the
UP and DOWN button to select No (normal) or Yes (tilt inverse), press the ENTER button to store. Press
the MENU button back to the last menu or let the unit idle one minute to exit menu mode.
 P/T Feedback
Select P/T Feedback, press ENTER button to confirm, present mode will blink on the display, press
UP/DOWN button to select No (Pan or tilt's position will not feedback while out of step) or Yes (Feedback
while pan/tilt out of step), press ENTER button to store. Press MENU button back to the last menu or let
the unit idle one minute to exit menu mode.
 BL.O. P/T Moving—Blackout while pan/tilt moving
Select BL.O. P/T Moving, press the ENTER button to confirm, present mode will blink on the display,
use the UP and DOWN button to select No (normal while pan/tilt moving) or Yes (blackout while pan/tilt
moving), press the ENTER button to store. Press the MENU button back to the last menu or let the unit
idle one minute to exit menu mode.
 BL.O. Color Change—Blackout while change color
Select BL.O. Color Change, press ENTER button to confirm, present mode will blink on the display, use
UP and DOWN button to select No (normal while changing color) or Yes (blackout while change color),
Press MENU button back to the last menu or let the unit idle one minute to exit menu mode.
 BL.O. Gobo Change—Blackout while change gobo
Select BL.O. Gobo Change, press ENTER button to confirm, present mode will blink on the display, use
UP and DOWN button to select No (normal while changing gobo) or Yes (blackout while changing gobo),
press ENTER button to store. Press MENU button back to the last menu or let the unit idle one minute to
exit menu mode.
C. Lamp Setting
Enter menu mode, select Fixture Setting, press the ENTER button to confirm, use the UP and DOWN
button to select On/Off, State/Power on, Off Via DMX, On if DMX on, Off if DMX off, Cooling Mode,
Ignition Delay or Low Power Delay..
 On/Off—Turn on/off the lamp
Select On/Off, press the ENTER button to confirm, present mode will blink on the display, use the UP and
DOWN button to select On (lamp on) or Off (lamp off), press the ENTER button to store. Press the
MENU button back to the last menu or let the unit idle one minute to exit menu mode.
33