Audible Signals; First Use - Electrolux AEG FAVORIT 35020 VI Notice D'utilisation

6

First use

Always remember that when performing operations such as:
• selecting a washing programme
• setting the water softener
• deactivation/activation of the audible signals
the appliance MUST be in setting mode.
If a programme light is illuminated and End of programme light is illuminated with fixed
light, the last performed programme is still set.
In this case the programme has to be cancelled:
1. Press and hold the Programme selection/RESET button until the light of the running
programme turns off and the End of programme light is flashing.
2. Release the Programme selection/RESET button.

Audible signals

Audible signals have been introduced to help indicate which operations the appliance is
performing:
• end of the washing programme
• intervention of an alarm due to malfunction.
Factory setting: audible signals activated.
It is possible to deactivate the audible signals, using the Programme selection/RESET
button.
Deactivation/activation of the audible signals
1. Press the On/Off button. The appliance must be in setting mode.
2. Press and hold Programme selection/RESET button until programme light A flashes
and programme light B illuminates with fixed light.
3. Press Programme selection/RESET button again: programme light A becomes fixed
and programme light B starts flashing.
4. After a few seconds:
– programme light A turns off
– programme light B goes on flashing
– End of programme light illuminates with fixed light, indicating that the audible
signals are active.
5. To deactivate the audible signals press again the Programme selection/RESET button:
the End of programme light turns off indicating that the audible signals have been
deactivated.
6. To memorise the operation, switch off the dishwasher.
7. To activate again the audible signals, simply follow the above operations until the End
of programme indicator light illuminates.
First use
Before using your dishwasher for the first time:
• Ensure that the electrical and water connections comply with the installation instruc-
tions
• Remove all packaging from inside the appliance