Cleaning The Spray Arms; External Cleaning; Internal Cleaning; Prolonged Periods Of Non-Operation - Electrolux AEG FAVORIT 35020 VI Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

20
Care and cleaning
6. Remove the flat filter from the base of the
washing compartment and clean both
faces thoroughly.
7. Put the flat filter back in the base of the
washing compartment and ensure that it
fits perfectly under the two guides (C).
8. Place the coarse filter (A) in the microfilter
(B) and press together.
9. Put the filter combination in place and
lock by turning the handle clockwise to
the stop. During this process ensure that
the flat filter does not protrude above the
base of the washing compartment.
WARNING!
NEVER use the dishwasher without filters. In-
correct repositioning and fitting of the filters
will produce poor washing results and may
result in damage to the appliance.

Cleaning the spray arms

NEVER try to remove the spray arms.
If residues of soil have clogged the holes in the spray arms, remove them with a cocktail
stick.

External cleaning

Clean the external surfaces of the machine and control panel with a damp soft cloth. If
necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent
(acetone, trichloroethylene etc....).

Internal cleaning

Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned
regularly with a damp cloth.
We recommend every 3 months to run the wash programme for heavy soiled dishes using
detergent but without dishes.

Prolonged periods of non-operation

If you are not using the machine for any prolonged period of time you are advised to:
1. Unplug the appliance and then turn off the water.
2. Leave the door ajar to prevent the formation of any unpleasant smells.
3. Leave the inside of the machine clean.

Publicité

Table des Matières
loading

Table des Matières