Introduction; Proper Use; Description Of Parts And Features - Parkside PLP 100 A1 Instructions D'utilisation Et Consignes De Sécurité

Pistolet à souder

Table des Matières

Les langues disponibles

Do not drink!

Dispose packaging and appliance in an

environmentally-friendly way!

Soldering gun PLP 100 A1

Introduction

Please make sure you familiarise yourself fully with the way

the device works before you use it for the first time and that

you understand how to handle it correctly. Please read the

operating instructions below. Be careful to keep these advice notes and

if necessary pass them on to a third party.

The device is intended for soldering tasks in a DIY environment. Soft solder-

ing takes place at temperatures below 450 °C. Suitable solders have typical

melting temperatures around 200 °C. Use the device only as described

and for the indicated purposes. The device is not intended for commercial

use. Any other use or modification to the device shall be considered as

improper use and could give rise to considerable dangers. The manufac-

turer will not accept liability for loss or damage arising from improper use.

Soldering tip

Union nut

Introduction

Table des Matières

Table des Matières

Plp 100