Mounting The Z21 ® - Detector X16 - Roco Z21-Detector X16 Manuel D'utilisation

Z21 Detector X16
®_
Mounting the Z21 - Detector X16
®
Mount the Z21 - detector X16 in a visible place with adequate ventilation so that the waste heat can dis-
®
sipate. Under no circumstances is the Z21 - detector X16 to be positioned close to strong sources of heat
®
such as heating radiators or places where there is direct sunlight. This Z21 - detector X16 has exclusively
®
been designed for use in dry interiors. The Z21 - detector X16 is therefore not to be operated in environ-
®
ments that are subjected to great temperature and air humidity fluctuations.
Tip: Mount the Z21 - detector X16 using half round head screws, e.g. 3 x 30 mm.
®
17
8010819920 .indd 17 07.01.2019 09:38:55