Functions And Feedback On The Baby Unit; Nightlight; Lullaby Function - Philips SCD580 Mode D'emploi

Dry materials
Wood, plaster, cardboard,
glass (without metal,
wires or lead)
Brick, plywood
Reinforced concrete
Metal grilles or bars
Metal or aluminium
sheets
5 Functions and
feedback on the
baby unit

5.1 Nightlight

The nightlight produces a soft glow that comforts
your baby.
Press the nightlight on/off button on the baby
1
unit to switch on the nightlight.
• Q appears on the display of the parent unit.
Press the nightlight on/off button again to
2
switch off the nightlight.
• The nightlight dims gradually before it goes
out completely.
• Q disappears from the display of the parent
unit.
Material Loss of
thickness range
< 30cm 0-10%
(12in)
< 30cm 5-35%
(12in)
< 30cm 30-100%
(12in)
< 1cm 90-100%
(0.4in)
< 1cm 100%
(0.4in)

5.2 Lullaby function

Press the lullaby play/stop button K on the
1
baby unit to play the last selected lullaby.
• The selected lullaby repeats for the set time.
If no lullaby was selected before, lullaby 1
•
is played.
Press the next lullaby button
2
another lullaby from the list.
•
If no lullaby is playing, the last selected
lullaby starts playing when you press the
next lullaby button
• When you press the next lullaby button
while a lullaby is playing, the next
lullaby starts playing.
To adjust the sound level of the lullaby, press
3
the volume + or the volume – button on the
baby unit.
to select
.
9