Using The Remote Control; Handling The Remote Control - Yamaha MCS-1330 Mode D'emploi

CONTROLS AND FUNCTIONS
■ Installing the batteries in the remote
control
Press
1
Press the part and slide the battery
compartment cover off.
2
Insert two supplied batteries (AA, R6, UM-3)
according to the polarity markings (+ and –)
on the inside of the battery compartment.
3
Slide the cover back until it snaps into place.
■ Notes on batteries
• Change both batteries when the operation range of the
remote control decreases.
• Use AA, R6, UM-3 batteries.
• Make sure that the polarities are correct. See the
illustration inside the battery compartment.
• Remove the batteries if the remote control is not to be
used for an extended period of time.
• Do not use old batteries together with new ones.
• Do not use different types of batteries (such as alkaline
and manganese batteries) together. Read the packaging
carefully as these different types of batteries may have
the same shape and color.
• If the batteries have leaked, dispose of them
immediately. Avoid touching the leaked material or
letting it come into contact with clothing, etc. Clean the
battery compartment thoroughly before installing new
batteries.
• Do not throw away batteries with general house waste;
dispose of them correctly in accordance with your local
regulations.
8
En

■ Using the remote control

The remote control transmits a directional infrared beam.
Be sure to aim the remote control directly at the remote
control sensor on the front panel of the system during
operation.
ON/STANDBY PHONES
OFF
ON/STANDBY
USB
OFF
30˚ 30˚
iPod CD USB
FM/AM PHONO AUX
PRESET
TUNING
MEMORY
REPEAT RANDOM
iPod MENU SEL
MENU
ENTER
VOL
VOL
TONE BALANCE
DISPLAY DIMMER SLEEP
PURE DIRECT MUTE

■ Handling the remote control

• The area between the remote control and the system
must be clear of large obstacles.
• Do not spill water or other liquids on the remote
control.
• Do not drop the remote control.
• Do not leave or store the remote control in the
following types of conditions:
– high humidity, such as near a bath
– high temperature, such as near a heater or a stove
– extremely low temperatures
– dusty places.
• Do not expose the remote control sensor to strong
lighting, in particular, an inverter type fluorescent
lamp; otherwise, the remote control may not work
properly. If necessary, position the system away from
direct lighting.
VOLUME
INPUT PURE TUNER PRESET
DIRECT
MIN MAX
Within 6 m
(20 feet)