Changing The Brightness Of The Front Panel Display; Setting The Sleep Timer; To Use Headphones - Yamaha MCS-1330 Mode D'emploi

■ To use the ECO mode of the CD player
This mode reduces the power consumption during the
standby mode. Even if the USB device is connected to the
USB port of the CD player, the USB device cannot be
charged when the CD player is in standby mode and ECO
mode is ON.
Press ON/STANDBY, OFF while pressing and
holding of the CD player to turn on the CD
player.
Each time you turn on the CD player by press
ON/STANDBY, OFF while pressing and holding
the CD player, ECO ON or ECO OFF appears on the front
panel display alternately.
Changing the brightness of the
front panel display
Follow the procedure below to change the brightness of
the receiver's and CD player's front panel display.
TONE BALANCE
DISPLAY DIMMER
PURE DIRECT
Press DIMMER.
You can choose your desired brightness of the front panel
display between normal (bright), mid dim, and dim.

Setting the sleep timer

The sleep timer sets the system to the standby mode after
the specified time elapses.
VOL
TONE BALANCE
DISPLAY DIMMER
PURE DIRECT
of
VOL
SLEEP
MUTE
DIMMER
SLEEP
SLEEP
MUTE
Press SLEEP repeatedly to select the desired
duration.
Each time you press the key, the duration changes as
follows.
The SLEEP indicator lights up in the front panel display.
y
• The sleep timer is canceled if you set the receiver to the standby
mode.
• If you press SLEEP while the sleep timer is set, the remaining
time appears in the front panel display.
To cancel the sleep timer
Press SLEEP repeatedly to select "OFF".

To use headphones

You can connect your headphones to the PHONES jack
on the front panel of the receiver.
The sound from the speakers and the subwoofer stops.
ON/STANDBY
PHONES
OFF
SYSTEM OPERATIONS
120min.
90min.
60min.
30min.
OFF
13
En