Positioning The Baby Monitor; Operating Range; Adjusting Loudspeaker Volume; Talk Function - Philips AVENT SCD510 Mode D'emploi

 Press and hold the on/off button 3 on the parent unit until the sound level lights light up
briefly. (Fig. 13)
The battery light lights up briefly (Fig. 14).
,
The LINK light flashes red. (Fig. 15)
,
The LINK light on the parent unit turns green and lights up continuously when a connection
,
has been established between the baby unit and parent unit (Fig. 16).
If no connection is established, the LINK light on the parent unit stops flashing and lights up
,
red. The parent unit beeps from time to time. (Fig. 1)

Positioning the baby monitor

1 Place the baby unit at least 1 metre/ feet away from your baby (Fig. 18).
 Place the parent unit within the operating range of the baby unit. Make sure it is at least 1
metre/ feet away from the baby unit to avoid acoustic feedback (Fig. 19).
For more information on the operating range, see section 'Operating range' below.

operating range

The operating range of the baby monitor is 330 metres/1000 feet in open air. Depending on the
surroundings and other disturbing factors, this range may be smaller. Indoors the operating range is
up to 50 metres/150 feet.
Dry materials
Wood, plaster, cardboard, glass
(without metal, wires or lead)
Brick, plywood
Reinforced concrete
Metal grilles or bars
Metal or aluminium sheets
For wet and moist materials, the range loss may be up to 100%.
Features

adjusting loudspeaker volume

1 Press the volume + or - button on the baby unit until the desired loudspeaker volume for
the baby unit has been reached. (Fig. 0)
Note: You only have to adjust the baby unit volume when you use the talk function (see below).
 Press the volume + or – button on the parent unit until the desired loudspeaker volume for
the parent unit has been reached (Fig. 1).
Note: If the volume is set to a high level, the units consume more power.

talk function

You can use the TALK button on the parent unit to talk to your baby (e.g. to comfort your baby).
1 Press and hold the TALK button and talk clearly into the microphone from a distance of 15-
0cm (Fig. ).
The green LINK light starts flashing.
,
 Release the TALK button when you have finished talking.
Material thickness
< 30cm/12in
< 30cm/12in
< 30cm/12in
< 1cm /0.4in
< 1cm/0.4in
EngliSh
Loss of range
0-10%
5-35%
30-100%
90-100%
100%
9