Product Description; Intended Use And Operation; Contraindications; Technical Data, Dispenser Dp - Nouvag DP30 Mode D'emploi

1

Product description

1.1

Intended use and operation

The Dispenser DP 30 serves as Infiltration pump into the connective tissue and is used in the following field
of applications:
• Tumescent infiltration for liposuction (Liposuction)
• Infiltration pump for venous treatment, varicose veins (Angiology)
The Dispenser DP 30 may only be operated by trained and qualified personnel.
The intended use is clearly described in the operation manual of the Dispenser DP 30 and is obvious to the
trained user.
1.2

Contraindications

a) Infectious wounds - liposuction may only be performed after the treatment of the infection and
necrotic tissue.
b) In principle, generally poor health of the patient
c) liposuction shortly after a strict diet of the patient
d) Morbid obesity (obesity) - large suction volumes increase the risk of death due to fluid shifts.
e) Intravascular infusion of liquids
Relevant cases in the literature must be considered.
1.3

Technical data, Dispenser DP 30

Voltage: ---------------------------------------------------------------------- switchable: 100 V / 115 V / 230 V , 50–60 Hz
Fuse, power supply: ----------------------------------------------------------------------------------- (2 fuses) T 1 AL 250 V AC
Power consumption: ----------------------------------------------------------------------------------------------------------- 40 VA
Volumetric displacement: ----------------------------------------------------------------------------------------------- 0 – 12.5 l/h
Maximum pressure with closed tube set: -------------------------------------------------------------------------------- 2.0 bar
Protection class: --------------------------------------------------------------------------------------------------------------- Class II
Applied part (Applied part is the tube set with its attached instruments): ------------------------------------ Type BF
Dimensions (W x D x H): ------------------------------------------------------------------------------------ 260 x 250 x 110 mm
Net weight control unit: ------------------------------------------------------------------------------------------------------ 2.4 kg
Maximum weight at the stand for the irrigation fluid bottle: -------------------------------------------------------- 2.0 kg
The mentioned volumetric displacement is only valid for aqueous solutions without any instrument connected.
1.4

Ambient conditions

Relative humidity:
Temperature:
Atmospheric pressure:
1.5

Warranty coverage

Purchasing the Dispensers DP 30 entitles you to a 1-year warranty. If you return the warranty card for
registration within four weeks of the date of purchase, warranty coverage will be extended for a further
6 months. Consumable parts are not covered by the warranty. Improper use or repair, or failure to observe
these instructions, relieve us from any obligation arising from warranty provisions or other claims.
2
Transport and storage:
max. 90 %
0 – 60°C, (32 – 140°F)
700 – 1060 hPa
Dispenser DP 30, operating instructions, REF 31678, V52/17
Dispenser DP 30
Operation:
max. 80 %
10 – 40°C, (50 – 104°F)
800 – 1060 hPa