First Activation; Operation; Use - Vortice Depuro Sky Notice D'emploi Et D'entretien

ENGLISH
The connections must be made only by professionally qualified personnel, before installing the appliance
on the ceiling

First activation

IMPORTANT: before commissioning the device, it is necessary to disassemble the filters and remove the plastic
packaging of the HEPA 14 absolute filter; this is in fact supplied in a package that keeps its characteristics and
properties intact.

Operation

The operation of the device is controlled by a control panel with display. The panel allows to perform the
following operations:
- switch-on/switch-off;
- fan speed setting;
- activation/deactivation of photocatalysis module (Evo models);
- hourly programming of the operation of the device, which will switch on/off automatically at the set times,
on a daily basis;
- programming of the fan speed, to achieve the ideal compromise between purification efficiency, noise
emissions and consumption, in correspondence with 3 time slots;
- hourly programming, of the switching on/off of the UV-C lamp that activates the photocatalysis process (Evo
models), on a daily basis;
- selection of the operating mode among the following ones:
manual, switching on and off is controlled by the user;
automatic, according to the time programming previously set;
In addition, the panel emits signals regarding the operation of the device:
- situation of saturated filters and need for their cleaning/replacement;
- abnormal operating situations of the device.
In addition, the panel can be connected via RS-485 Modbus port to a BMS – Building Management System,
for simultaneous control of up to 32 devices.
The clean air outlets are equipped with a diffuser that can be manually oriented (Easy models)

Use

All functions are managed by a control panel with display. See the relevant Instructions Manual for
details on use.
20