Parts Description; Main Printing Unit; Setting The Dk Roll - Brother QL-1060N Guide D'installation Et De Configuration

8
STEP1 Getting started

2 Parts Description

Main Printing Unit

Front
DK Roll compartment cover

3 Setting the DK Roll

1
Press and hold the ON/OFF button to turn
the QL-1060N off. Pull up the left and right
levers on the machine under the top cover,
and open the cover.
2
Put the spool into the spool guides in the DK
Roll compartment.
Make sure that the spool arms are inserted firmly in
•
the spool guides on the left and right.
Insert the spool with the DK Roll located on the right
•
hand side of the QL-1060N.
Rear
LED lamp
ON/OFF button
CUT button
FEED button
Serial port
USB port
LAN port
Power cord