Brother QL-1060N Guide D'installation Et De Configuration page 20

18
STEP2 Installing the Software
6
After restarting the computer,
connect the USB/LAN cable to the
machine.
As the caution label is put on the USB
port of the machine, remove it and
then connect the USB cable.
7
Connect the USB/LAN cable to the USB/LAN port of Macintosh
Press ON/OFF button ( ) of the machine to turn on the power.
When connecting the machine to Macintosh
connected correctly. At that time, connect the machine directly to the USB port
of Macintosh
8
Double click the drive where Mac OS
order of [Applications]-[Utilities]-[Printer Setup Utility].
For USB interface cable users
9
Click Add and choose USB at the top of the
screen (in Mac OS
Choose QL-1060N from the list and click
Add again to add the printer to the Printer
Setup Utility.
For Mac OS
printer with the BRPTUSB connection. (If you do
so, an error dialog appears when an printing error
occurs.) Set the appropriate printer name.
Now, go to step 10.
For Network interface cable users (Simple Network Configuration)
9-1 Click Add.
For Mac OS
following selection.
For Mac OS
step.
®
.
® X 10.3.9).
®
X 10.4.x, click Add and add the
®
X 10.3.9 users, make the
® X 10.4.X users, go to the next
Serial port
USB port
LAN port
Power cord
®
via USB hub, it may not be
®
X is installed, and click in
® .