Parts Description; Main Printing Unit; Connecting The Power Supply - Brother QL-710W Guide D'installation Rapide

8

2 Parts Description

Main Printing Unit

Front
DK Roll compartment cover
Feed
button
When the Wi-Fi lamp is lit, wired network connections
are disabled.

3 Connecting the Power Supply

Connect the power cord to the
QL-710W/720NW and then plug the
power cord into an electrical outlet.
Check that the electrical outlet is 120V
•
AC before plugging the power cord.
Unplug the power cord from the
•
electrical outlet after you have finished
using the QL-710W/720NW.
Do not pull the power cord when
•
unplugging it from the electrical outlet.
The wire in the power cord may
become damaged.
Do not connect the QL-710W/720NW
•
to the computer until directed to do so
when installing the printer driver.
Wi-Fi Status
lamp lamp
Wi-Fi
button
Cut ON/OFF
button button
Rear
USB port
Serial port LAN port
The plug may differ by countries.
<QL-710W>
Power port
Power cord
<QL-720NW>
Power port
Power cord
USB port