P-Touch Editor Lite Lan (Windows®) - Brother QL-710W Guide D'installation Rapide

34
P-touch Editor Lite LAN (Windows
Installing P-touch Editor Lite
LAN
P-touch Editor Lite LAN is a basic
version of a label-editing tool.
• In order for P-touch Editor Lite LAN
to be used, the IP address of this
printer must be correctly specified.
The IP address can be specified
with a utility such as BRAdmin Light,
which can be installed from
[Network Utility] on the CD-ROM.
For details on using this utility, refer
to "Setting the IP address and
subnet mask" in the "Network
User's Guide" (PDF).
• On a network where the IP address
is automatically assigned, (for
example with DHCP) the IP
address is automatically assigned
when the printer is connected to the
network, therefore the printer can
be used immediately. However,
since the IP address may change
dynamically, we recommend
specifying a static IP address when
P-touch Editor Lite LAN is being
used. For details, contact your
network administrator.
• Specify the settings after consulting
with your network administrator.
1
Start the computer and put
the CD-ROM into the CD-
ROM drive.
If it does not start up
automatically, open the files
on the CD-ROM and double
click on "Start.exe".
2
Click [Custom Installation].
3
Click [P-touch Editor Lite
LAN].
®
)
4
Follow the on-screen
instructions.
The PteLiteLAN folder is created.
This completes the installation.
See the Software User's Guide
(PDF) for information on using
P-touch Editor Lite LAN.