Livestrong LS8.0E Manuel Du Propriétaire page 18

ASSEMBLY STEp 6
All
MOdElS
LOWER LINK ARM
TEFLON WASHERS (V)
18
All manuals and user guides at all-guides.com
lS10.0E SHOWN
NUT (Y)
LOWER HANDLEBAR
FLAT WASHER (W)
SPRING WASHER (B)
BOLT (X)
HARdWARE bAG 6 CONTENTS :
TEFLON
FLAT WASHER (W)
WASHER (V)
17 mm
28.4 mm
Qty: 2
Qty: 4
Open hardware bag 6.
A
Align end of lower linK arm with bracket on
B
bottom of lower handlebar.
Place teflon washers (v) on both sides of
C
the lower linK arm. While holding teflon
washers (v) slide lower linK arm into
bottom end of lower handlebar.
Secure the joint with 1 flat washer (w), 1
D
spring washer (b),1 bolt (X) and secure
with 1 nut (y).
Repeat steps B–D on the opposite side of the
E
elliptical.
SPRING WASHER (B)
15 mm
Qty: 2
BOLT (X) NUT (Y)
70 mm Qty: 2
Qty: 2