Storing The Machine; Inspection And Maintenance By User - Stihl Km 94 R Notice D'emploi

English
Use resistor type spark plugs with a
N
properly tightened adapter nut.
Installing the Spark Plug
Fit the spark plug and tighten it
N
down firmly.
Press the boot firmly onto the spark
N
plug.
1
2
Fit the cap (1), insert the screw (2)
N
and tighten it down firmly.
16

Storing the Machine

For periods of 3 months or longer
Drain and clean the fuel tank in a
N
well ventilated area.
Dispose of fuel properly in
N
accordance with local
environmental requirements.
Run the engine until the carburetor
N
is dry – this helps prevent the
carburetor diaphragms sticking
together.
Thoroughly clean the machine – pay
N
special attention to the air filter.
Remove, clean and check the
N
attachment. Coat metal parts with
corrosion inhibiting oil.
Store the machine in a dry and
N
secure location Keep out of the
reach of children and other
unauthorized persons.
Inspection and Maintenance
by User
Throttle Cable
Checking adjustment of throttle cable
Error: Engine speed increases when
only the throttle trigger is depressed.
Start the engine.
N
Depress the throttle trigger (1) – do
N
not press down the throttle trigger
lockout (2).
If the engine speed increases or if the
cutting attachment rotates, the throttle
cable has to be adjusted.
Shut off the engine.
N
Have throttle cable adjusted by your
N
dealer. STIHL recommends an
authorized STIHL servicing dealer.
Spark Arresting Screen in Muffler
If the engine is down on power, check
the spark arresting screen in the muffler.
Wait for the muffler to cool down.
N
2
1
KM 94 R