JVC KD-AVX40 Manuel D'instructions page 71

Symptoms
• "Invalid Channel" appears on the monitor for
about 5 seconds, then returns to the previous
display when listening to the SIRIUS Satellite
radio.
• "CHANNEL–––" appears on the display for
about 2 seconds, then returns to the previous
channel while listening to the XM Satellite
radio.
• "No Name" or "–––" appears on the monitor. No text information for the selected channel.
• "Channel is Updating XX% completed" or
"UPDATING" appears on the monitor and no
sound can be heard.
• "OFF AIR" appears on the monitor while
listening to the XM Satellite radio.
• "LOADING" appears on the monitor while
listening to the XM Satellite radio.
• "Reset08" flashes on the monitor.
• Satellite radio does not work at all.
• Sound quality changes when receiving HD
Radio stations.
• No sound can be heard.
• "Reset 8" appears on the display.
• No picture appears on the monitor.
• The playback picture is not clear and legible.
Remedies/Causes
No broadcast on the selected channel. Select another
channel or continue listening to the previous channel.
Selected channel is no longer available or is unauthorized.
Select another channel or continue listening to the
previous channel.
The receiver is updating the channel information and it
takes a few minutes to complete.
Selected channel is not broadcasting at this time. Select
another channel or continue listening to the previous
channel.
The unit is loading the channel information and audio. Text
information is temporarily unavailable.
Reconnect this unit and the Satellite radio correctly and
reset the unit.
Reconnect the Satellite radio after a few seconds.
Fix the reception mode either to <Digital> or <Analog>
(☞ page 46).
• <Analog> is selected when receiving all digital
broadcast of HD Radio station. Select <Digital> or
<Auto> (☞ page 46).
• <Digital> is selected when receiving weak digital
signals or receiving conventional radio broadcast. Select
<Analog> or <Auto> (☞ page 46).
Reconnect this unit and the HD Radio tuner box correctly,
then reset the unit.
• Turn on the video component if it is not on.
• This unit is not connected to the video component
correctly. Connect it correctly.
Adjust items in <Picture Adjust>. (☞ page 52)
71
REFERENCES