Technical Data; Warranty; Ec Declaration Of Conformity - GreenWorks G48LT30 Manuel Opérateur

EN
Problem Possible Cause
The line Lines are welded
does not ad- to themselves.
vance.
Not enough line
on spool.
Lines are worn too
short.
Lines are tangled
on spool.
The line The machine is
keeps used incorrectly.
breaking.
The grass Cut tall grass at
winds ground level.
around the
trimmer
head and
motor hous-
ing.
The line The cut-off blade
does not cut becomes dull.
well.
Vibration The line is worn
increases down at one side
obviously. and not advanced
in time.
8

TECHNICAL DATA

Voltage
No load speed
Cutting head
Cutting line diameter
Cutting path diameter
Weight (without bat-
tery pack)
Measured sound pres-
sure level
Guaranteed sound
power level
Vibration
Solution
Lubricate with silicone
spray.
Install more line.
Advance the cutting line.
1. Remove the lines from
the spool.
2. Wind the lines.
1. Cut with the tip of the
line, avoid stones, walls
and other hard objects.
2. Advance the cutting
line regularly to keep full
cutting width.
1. Cut tall grass from the
top down.
2. Remove no more than
8" in each pass to prevent
wrapping.
Sharpen the cut-off blade
with a file or replace it.
Make sure that the line on
both sides is normal. Ad-
vance the line.
48 V
8600±10% RPM
Automatic feed
1.65 mm
12in. (305 mm)
2.675 kg
L =94 dB(A), K = 3 dB(A)
PA PA
L = 96 dB(A)
WA.d
2 2
4.8 m/s , k=1.5 m/s
English
Battery model
Charger model
9

WARRANTY

(The full warranty terms and conditions can be found on
Greenworks website https://www.greenworkstools.eu)
The Greenworks warranty is 3 years on the product, and 2
years on batteries (consumer/private usage) from the date of
purchase. This warranty covers manufacturing faults. A faulty
product under warranty might be either repaired or replaced.
A unit that has been misused or used in other ways then
described in the owner's manual might be rejected for
warranty. Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not affected
by any additional warranty offered by a dealer or retailer.
A faulty product must be returned to the point of purchase in
order to claim for warranty, together with the proof of
purchase (receipt).
10 EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name: GLOBGRO AB
Globe Group Europe
Address: Riggaregatan 53 211 13 Malmö, Sweden
Name and address of the person authorised to compile the
technical file:
Name: Micael Johansson
Address: Riggaregatan 53 211 13 Malmö, Sweden
Herewith we declare that the product
Category:
Model:
Serial number:
Year of Construction:
• is in conformity with the relevant provisions of the
Machinery Directive 2006/42/EC.
• is in conformity with the provisions of the following
other EC-Directives:
8
BAM701/ 2931207 and other
BAM series
CAM806/2931407 and other CAM
series
Noise value.
Grass trimmer
G48LT30 ( STE306 )
See product rating label
See product rating label