Télécharger Imprimer la page

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 111
English

Installation

It is important that the stove is installed properly in order to preserve both the environ-
ment and safety
The stove should be placed on non-combustible material and freely on the floor.
The stove may only be installed by a qualified/competent
otherwise, the warranty will be voided.
When installing the stove, all local rules and regulations, including those referring to
national and European standards, shall be observed. Local authorities and a chimney
specialist should be consulted prior to installation.
It is prohibited to carry out unauthorised alterations to the stove.
NOTE!
The local chimney sweep should be notified of the stove installation before its first
usage.
There must be plenty of fresh air in the room where the stove is being installed to
ensure proper combustion - possibly through an airbox connection. Note that any me-
chanical exhaust ventilation e.g., extraction hoods or air vents, may reduce the air sup-
ply. Any air vents must be placed in such a manner that the air supply is not blocked.
The stove consumes 10 to 20 m ³ of air per hour.
The floor structure must be able to carry the weight of the stove and the chimney. If
the existing floor structure doesn't meet this requirement, suitable measures (e.g., load
distributing plate) shall be taken to that end.
Consult a building expert.
If the stove is installed on a flammable floor, the dimensions of the non-combustible
surface under the stove shall comply with national/local
regulations.
The stove should be set up at a safe distance from inflammable materials.
Please make sure that objects made of combustible materials (such as furniture) are not
placed closer than the distances indicated in the following sections concerning installa-
tion (fire risk).
When you choose where to set up your RAIS/
consider the heat distribution to the other rooms. This will allow the optimal use of
your stove.
See the manufacturer's plate on the wood burning stove.
Upon receiving, the stove must be inspected for defects.
This appliance may only be installed by a qualified
See www.rais.com / www.attika.ch for dealer list.
attika
RAIS/
attika
NOTE!
dealer/installer.
- User manual for VIVA L
attika dealer/installer,
RAIS /
wood burning stove, you should
RAIS/
attika
12

Publicité

loading

Ce manuel est également adapté pour:

Viva 100 lViva 120 lViva 160 lViva 100 l classicViva 120 l classicViva 160 l classic