attika Viva L Série Manuel De L'utilisateur page 85

English
Installing Viva L with swivel foot
Available with and without a swivel base.
If supplied with a swivel base, the foot is mounted under the stove and secured
with two wing nuts.
The foot can be set to:
• turn 90° (45° to each side) - (set when delivered)
• turn 360°
Start by removing the air inlet cover on the back of the stove.
To ease installation the stove has been
angled 45°
to the left at the factory.
This ensures easy access to the wing nuts,
which must be removed after installation.
The plastic tab marked "FRONT" marks the
stove's actual centre point and is on the front of
the swivel foot.
The tab must therefore be at 90° in relation to the
wall when installing. Remove when installation is
complete by pulling gently.
13
A
attika
RAIS/ - User manual for VIVA L
A
A