Trouble Shooting - Grizzly ART 2420 Lion Traduction De La Notice D'utilisation Originale

GB

Trouble shooting

Problem
Appliance won't
start
Intermittent oper-
ation
Much vibration
Loud noise
Bad trim
38
Possible cause
Battery (18) discharged
Battery (18) not in
On/Off switch ( 2) de-
A
fective
Motor defective
Internal loose contact
On/Off switch (2) defective
Spool ( 17) is dirty
A
Spool ( 17) is defective
A
Motor defective
Line spool ( 17) does
A
not
have sufficient line
The string is not guided
out of the spool
Trimming assembly dirty
Battery (18) not fully
charged
Corrective action
Recharge battery (18) (see „Charging")
Insert battery (18) (see „Operation")
Send in to Service Centre for repair
Send in to Service Centre for repair
Clean spool
(see „Cleaning and servicing")
Exchange spool (see „Cleaning and
servicing")
Send in to Service Centre for repair
Lengthen cutting line
(see "Operation")
or exchange spool
(see "Cleaning and maintenance")
Take off the string spool and thread the
string to the outside through the string
outlet eye ( 22); then remount the
I
string spool.
Clean trimming assembly (see „Clean-
ing and servicing")
Recharge battery (18) (see „Charging")