Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ENGLISH (Original instructions)
SPECIFICATIONS
Dimensions (L X W X H)
Standard battery cartridges
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The followings show the symbols used for tool.
･
Read and understand tool labels and
manual.
･
Operators and others in work area must
wear safety glasses with side shields.
･
Keep fingers away from trigger when not
driving fasteners to avoid accidental
firing.
･
volts
･
direct current
･
Container under pressure, keep away
from temperatures over 50°C (for ex.
sun radiation) Keep container in a well
ventilated place.
･
Use only outside or well ventilated
rooms. Do not breathe gas.
･
Do not use near flames or sprays on
heated surfaces. In use, may form
flammable/explosive vapour-air mixture.
･
Do not damage, puncture or burn even
after use.
･
Use only in ventilated area to avoid
nausea and unconsciousness. Never
use tool in combustible atmospheres.
The tool exhaust may ignite flammable
materials.
･
Do not use on scaffoldings, ladders.
･
Warning: hot surface!
Do not touch around this symbol.
Touching the surface may cause burns
or injuries.
Model
Nail length
Nail capacity
Net weight
Rated voltage
Nail Gauge 16Ga :15 mm - 65 mm (5/8" - 2-1/2")
266 mm (10-1/2") X 90 mm (3-1/2") X 305 mm (12")
USD502-2
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1.
Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3.
Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
4.
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5.
Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6.
Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
2
FG01
100 nails (2strip)
2.2 kg (4.8 lbs.)
D.C. 7.2 V
BL7010
GEA006-2
Publicité
Table des Matières
