Installation And Operating Instructions; About This Document - Wilo Modbus Notice De Montage Et De Mise En Service
Les modules if sont conçus pour commander de manière externe et signaler les états de fonctionnement des pompes des gammes • wilo-cronoline-il-e (à partir de 10/2010) • wilo-cronotwin-dl-e (à partir de 10/2010) • wilo-cronobloc-bl-e • wilo-veroline-ip-e (
Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
English
Installation and operating instructions
1 General
1.1 About this document
The language of the original operating instructions is German. All other lan-
guages of these instructions are translations of the original operating instruc-
tions.
These installation and operating instructions are an integral part of the product.
They must be kept readily available at the place where the product is installed.
Strict adherence to these instructions is a precondition for the proper use and
correct operation of the product.
These installation and operating instructions correspond to the relevant version
of the product and the underlying safety standards valid at the time of going to
print.
2 Safety
These operating instructions contain basic information which must be adhered
to during installation and operation. For this reason, these operating instruc-
tions must, without fail, be read by the service technician and the responsible
operator before installation and commissioning.
It is not only the general safety instructions listed under the main point "safety"
that must be adhered to but also the special safety instructions with danger
symbols included under the following main points.
18
WILO SE 11/2013
Publicité
Table des Matières
