Wilo Modbus Notice De Montage Et De Mise En Service page 33
Les modules if sont conçus pour commander de manière externe et signaler les états de fonctionnement des pompes des gammes • wilo-cronoline-il-e (à partir de 10/2010) • wilo-cronotwin-dl-e (à partir de 10/2010) • wilo-cronobloc-bl-e • wilo-veroline-ip-e (
Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8.2 Modbus IF-Module
Set data format with parameter C in the pump menu 5.2.5.0 in accordance with
the following table:
Parameter C
2
3
6
10
* N – no parity, E- even parity, O – odd parity
All other settings are reserved for expansions (see also the protocol description).
8.3 BACnet IF-Module
The BACnet instance number is set with the parameters
C (in the pump menu 5.2.5.0)
E (in the pump menu 5.2.6.0)
F (in the pump menu 5.2.7.0)
This requires conversion into a hexadecimal value
by an 'h' suffix).
The instance number is divided between the three parameters (example 4660):
1)
For example with the calc.exe program in the scientific view
Installation and operating instructions Wilo-IF-Modules Modbus, BACnet
Parity*
Data bits
N
8
N
8
S
8
O
8
Stop bits
1
2
1
1
1
) (indicated in the following
English
29
Publicité
Table des Matières
