Comunello SHOWIN MS45RM20H0B00 Mode D'emploi page 17

2. Tubular motor with built-in control unit
2.1 Tubular motor for awnings and rolling shutters with built-in control unit
This automatic opening system consists of a tubular motor with the following features:
• It is provided with a 434.15 MHz super-heterodyne radio receiver.
• It is driven by means of R-CONTROL transmitters.
• It is possible to drive the actuator also by mean of an external push-button (type: Normally Open, each
series or model).
• The programming phase can be effected via radio or by means of an external switch.
• It is necessary to use a sensor model WLT.
2.2 Functioning with external wired switch
Pressing the external wired switch, the control unit has the following functioning logic:
OPENS __ STOPS __ CLOSES __ STOPS __ OPENS ...
2.3 Functioning with transmitters
At each push button pressure, the functioning logic is the following.
CLOSE > CLOSE
STOP > STOP
OPEN > OPEN
2.4 Transmitters programming
Up to 48 different channel can be stored on each central unit. To store the transmitters read carefully theparagraph
"PROGRAMMING OF THE FUNCTIONS BY MEANS OF A TRANSMITTER OF THE R-CONTROL SERIES".
> CLOSE
> STOP
> OPEN
17