System Requirements - Numark MIXDECK QUAD Guide D'utilisation Rapide

BOX CONTENTS
• MIXDECK QUAD
• USB cable
• 30-pin cable
• Power adapter
• Software CD
• Quickstart Guide
• Safety & Warranty Information Booklet

SYSTEM REQUIREMENTS

Windows:
Operating System:
• Windows XP (latest Service Pack, 32-bit)
• Windows Vista (latest Service Pack, 32-/64-
bit)
• Windows 7 (latest Service Pack, 32-/64-bit)
Processor:
• Intel Pentium 4 2.4GHz
• Intel Core Duo
2GB RAM
500MB free hard drive space
Available USB port
CD-ROM drive
REGISTRATION
Please go to http://www.numark.com to register your MIXDECK QUAD. Registering your product ensures that we can keep
you up-to-date with any new product developments and provide you with world-class technical support, should you run into any
problems.
GROUND RULES
1. Make sure all items listed in the BOX CONTENTS section are included in the box.
2. READ SAFETY & WARRANTY INFORMATION BOOKLET BEFORE USING THE PRODUCT.
3. Study the connection diagram in this guide.
4. Place mixer in an appropriate position for operation.
5. Make sure all devices are turned off and all faders and gain knobs are set to "zero."
6. Connect all stereo input sources as indicated in the diagram.
7. Connect the stereo outputs to power amplifier(s), tape decks, and/or other audio sources.
8. Plug all devices into AC power.
9. Switch everything on in the following order:
•
Audio input sources (i.e. turntables, CD players, etc.)
•
Mixer
•
Last, any amplifiers or output devices
10. When turning off, always reverse this operation by turning off:
•
Amplifiers
•
Mixer
• Last, any input devices
Mac:
Operating System:
• OS X 10.6 (latest update)
• OS X 10.7
Processor:
• Intel Core Duo
2GB RAM
500MB free hard drive space
Available USB port
CD-ROM drive
3