EIBENSTOCK EMF 180.1 Notice Originale page 24

Dust Extraction
Dust which occurs during your work is hazardous to health. That is
why the EMF 180.1 must be used with a vacuum cleaner, and a dust
mask has to be worn.
The suitable Wet/Dry Vacuum Cleaner DSS 35 M iP is available as
accessory. It can directly be attached to the connection on the dust hood.
Fig.6
Abb.7
Abb.8
When insert the suction hose pull the ring of the hose fixing and turn the
nozzle till the fixation engages.
The suction hose can be locked
against slipping out by means of the
hose fixing.
Make the necessary drill hole as follows:
Put the suction hose in the connector of
the hood.
Mark the plug-in depth with a crayon.
(see arrow)
Drill 13 mm from this marking (line) a hole
with diameter 6 mm in the nozzle.
24