Hitachi DH 24PC2 Mode D'emploi Et Instructions De Securite page 24

English
9. Drilling holes (rotation only)
Drill chuck (13VLD–D)
(includes chuck wrench)
Code No. 321813
Chuck wrench
1/2" (13 mm) drill chuck ass'y (includes chuck wrench) and chuck (for drilling
into steel or wood).
10. Driving Screws (rotation only)
Phillips Driver Bit
Bit No.
No.2
No.3
11. Dust cup, Dust collector (B)
Dust cup
Code No. 971787
12. Hammer grease A
1.1 lbs (500 g) (in a can) Code No. 980927
0.15 lbs (70 g) (in a green tube) Code No. 308471
0.07 lbs (30 g) (in a green tube) Code No. 981840
NOTE:
Specifications are subject to change without any obligation on the part of the
HITACHI.
24
Chuck adaptor (D)
(SDS-plus shank)
Code No. 303624
Bit No.
Screw Size
1/8" ~ 3/16" (3 – 5 mm)
1/4" ~ 5/16" (6 – 8 mm)
Dust collector (B)
Code No. 306885
Chuck adaptor (D)
(SDS-plus shank)
Code No. 303624
Length
31/32" (25 mm)
31/32" (25 mm)
Code No.
971511Z
971512Z