Protection Devices - Fronius Galvo 1.5-1 208 Instructions De Service

Fronius Galvo
Frequency clearing times setting range
Total harmonic distortion
Power factor (cos phi)
General data
Maximum efficiency
CEC efficiency
Night self-consumption
Self-consumption during operation
Cooling
Degree of protection
Dimensions l x h x w
Weight
Shipping dimensions l x h x w
Shipping weight
Permissible ambient temperature
(at 95% rel. humidity)
Permissible storage temperature
(with 95% rel. humidity)

Protection devices

Ground fault monitoring
Stand alone operation protection
Reverse polarity protection
Arc Detector / Interrupter
Overtemperature
1) DC voltage reduction at altitudes > 6561 ft (2000 m)
2) Tolerance for set switch off time 4%
3) Assured by electrical design of the inverter
4) Ind. = inductive
48
at 208 V
at 220 V
at 240 V
at 208 V
at 220 V
at 240 V
cap. = capacitive
1.5-1 208-240 2.0-1 208-240
0.016 - 600 s
< 4 %
1
0,85 - 1 ind./cap.
95.8 %
94.0 %
94.0 %
94.5 %
0.7 W
0.9 W
0.9 W
8.0 W
Forced-air ventilation
NEMA4X
24.7 x 16.9 x 8.1 in.
628 x 428 x 205 mm
36.05 lbs.
16.35 kg
30.1 x 21.7 x 11.4 in.
770 x 550 x 290 mm
43.10 lbs.
19.55 kg
-40 °F - +122 °F
- 40 °C - +50 °C
-40 °F - +158 °F
- 40 °C - +70 °C
Integrated GFDI
(Ground Fault Detector/Interrupter)
Integrated
Integrated
Integrated
Operating point offset /
active cooling
2)
4)
94.5 %
94.5 %
94.5 %