Features; Keyless Chuck; Assembly; Packing List - Ryobi HJP001 Manuel D'utilisation

PRODUcT SPEcIFIcATIONS
Chuck ...........................................................3/8 in. Keyless
Motor ......................................................................12 V DC
Switch .............................. VSR (Variable Speed Reversible)
kNOW yOUR DRILL
See Figure 1, page 10.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
DIREcTION OF ROTATION SELEcTOR
(FORWARD/REvERSE/cENTER LOck)
Your drill has a direction of rotation (forward/reverse/center
lock) selector located above the switch trigger for changing
the direction of bit rotation. Setting the switch trigger in the
OFF (center lock) position helps reduce the possibility of
accidental starting when not in use.
UNPAckING
This product has been shipped completely assembled.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.

PAckING LIST

Drill
Battery Packs (2)
Charger
Bag
Operator's Manual

FEATURES

No Load Speed .....................................0-600 r/min. (RPM)
Torque ..................................................................... 90 in.lb.

kEyLESS cHUck

The keyless chuck allows you to hand-tighten or release the
drill bit in the chuck jaws.
MAG TRAy
The magnetic tray conveniently stores screws or other small
parts.
vARIABLE SPEED
The variable speed switch trigger delivers higher speed with
increased trigger pressure and lower speed with decreased
trigger pressure.

ASSEMBLy

WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this product.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible serious
personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
6 - English
(ScREW HOLDER)
™