Incorrect Measurement - Beurer BG 21 Mode D'emploi

7. Incorrect measurement

If the scale detects an error during weighing, " " or "
If you step onto the scale before "0.0" appears in the display, the scale will not operate properly.
Possible causes of error:
– The maximum load-bearing capacity of
180 kg (397 lb, 28 St) was exceeded.
– The electrical resistance between the electrodes
and the soles of your feed is too high (e.g. with
heavily callused skin).
– Your body fat lies outside the measurable range
(less than 3% or greater than 55%).
– Your percentage of water lies outside the measur-
able range (less than 25% or greater than 75%)
8. Disposal
Used, fully discharged batteries must be disposed of in a specially labeled collection con-
tainer, at toxic waste collection points or through an electrical retailer. You are under legal
obligation to dispose of batteries correctly.
Note: You will find these markings on batteries containing harmful substances:
Pb = battery containing lead, Cd = battery containing cadmium, Hg = battery containing
mercury.
Please dispose of the device in accordance with the directive 2002/96/EC – WEEE (Waste Electrical
and Electronic Equipment). If you have any queries, please refer to the local authorities responsible
for waste disposal.
" appears in the display.
Remedy:
– Only weigh the maximum permissible weight.
– Repeat weighing barefoot. Slightly moisten the soles
of your feet if necessary. Remove the calluses on the
soles of your feet if necessary.
– Repeat weighing barefoot.
– Slightly moisten the soles of your feet if necessary.
– Repeat weighing barefoot.
– Slightly moisten the soles of your feet if necessary.
15