The Signal Select Menu - Sony VPL-FX200U Mode D'emploi

The SIGNAL SELECT Menu

The SIGNAL SELECT Menu is used for selecting the
input signal.
Depending on the interface board installed in the
projector, some items may not be displayed in the
menu.
SIGNAL SELECT
INPUT-A: RGB
INPUT-B: RGB
INPUT-C: RGB
Operation
Use the V or v key to select the input, then press the
ENTER key.
INPUT-A
Selects audio and video signals input from the INPUT
A connectors. You can select the RGB, component or
HDTV (YP P ) signal.
B R
SIGNAL SELECT
INPUT-A: RGB RGB
INPUT-B: RGB COMPONENT
INPUT-C: RGB
YP P
B R
Note
When the PC-3000 signal interface switcher is
connected to the INPUT A connectors, you cannot
select the item.
32
(GB)
INPUT-A
INPUT-A
INPUT-B
Selects the input signal from the connectors on the
optional IFB-12A interface board installed in the
INPUT B section. You can select the RGB,
component, HDTV (YP P
B
SIGNAL SELECT
INPUT-A: RGB
INPUT-B: RGB RGB
INPUT-C: COMPONENT RGB
VIDEO
S-VIDEO
YP P
B R
Note
This item is not displayed when the optional interface
board other than the IFB-12A is installed in the INPUT
B section, or when the output mode is selected on the
IFB-12A.
INPUT-C
Selects the input signal from the connectors on the
optional IFB-12A interface board installed in the
INPUT C section. You can select the RGB,
component, HDTV (YP P
B
SIGNAL SELECT
INPUT-A: RGB
INPUT-B: RGB
INPUT-C: RGB RGB
COMPONENT
VIDEO
S-VIDEO
YP P
B R
Note
This item is not displayed when the optional interface
board other than the IFB-12A is installed in the INPUT
C section.
), video or S video signal.
R
INPUT-B
), video or S video signal.
R
INPUT-C