The Input Setting Menu - Sony VPL-FX200U Mode D'emploi

The INPUT SETTING Menu

The INPUT SETTING menu is used to change the
settings of the input signal. Unadjustable items, which
vary according to the input signal, are not displayed in
the menu.
INPUT SETTING
DOT PHASE: 8
SIZE H:1 3 4 4
SHIFT H:1 2 3 V: 1 2 3
Operation
1. Select an item
Use the V or v key to select the item, then press the b
or the ENTER key.
2. Adjust an item
• When changing the adjustment level:
To increase the number, press the V or b key.
To decrease the number, press the v or B key.
Press the ENTER key to restore the original screen.
• When changing the setting:
Press the V or v key to change the setting, then press
the B or the ENTER key.
The original screen is restored.
DOT PHASE
Adjusts the phase of the LCD panel and the input
signal when H FILTER is set to OFF.
Adjust the value to obtain the clearest picture.
DOT PHASE: 8
SIZE
Adjusts the horizontal size of the picture.
SIZE
H:1 3 4 4
INPUT-A
1024x768
N O . 2 3
n 2 0
As the setting for H increases, the horizontal size of
the picture becomes larger, and as the setting
decreases, the size becomes smaller. Adjust the setting
according to the input signal.
Use the B or b key to adjust the horizontal size.
SHIFT
Adjusts the position of the picture.
SHIFT H:1 2 3 V: 1 2 3
H adjusts the horizontal position of the picture, and
V adjusts the vertical position. As the setting for H
increases, the picture moves to the right, and as the
setting decreases, it moves to the left.
As the setting for V increases, the picture moves up,
and as the setting decreases, it moves down.
Use the B or b key to adjust the horizontal position
and the V or v key for the vertical position.
SCAN CONV (converter)
Converts the signal to display the picture so that it fits
the screen size.
INPUT SETTING
DOT PHASE: 8
SIZE H:1 0 5 6
SHIFT H:1 2 3 V: 1 2 3
SCAN CONV: ON ON
OFF
ON: Displays the picture according to the screen
size. The picture will lose some clarity.
OFF: Displays the picture while matching one pixel
of input picture element to that of the LCD. The
picture will be clear but the picture size will be
smaller.
INPUT-A
800x600
N O . 1 7
n
2 1
27
(GB)