Installing The Handle; Storage - AVG BSC27SB2 Manuel D'utilisation

INSTALLING THE HANDLE

To install the handle please follow the below instructions:
1. Pull away the door gasket in the area where the handle is to be installed on the left side as shown
below in Fig .1 . The gasket is easily displaced by hand, no tools are necessary.
2. Align the handle with the screws installed. Tighten the screws using a Phillips head screwdriver until
the handle sets both flush and secured tightly against the door frame. DO NOT over tighten as this
will cause damage to the handle assembly. Fig .2 Replace the door gasket to its original position.
Fig. #1
 Gasket

Phillips Head Screw

STORAGE

This unit can store up to 27 wine bottles: 6 X 4 bottle shelves plus 3 bottle on the lower part of
the cabinet. The unit's
size/dimensions see below picture).
 Phillips Head Screw Driver
 Handle
capacity is based on a regular size 750ml Bordeaux bottle (for
Fig. #2
30