Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Insert brackets onto the cart trim piece, rear
1. Insert the bracket onto cart trim piece, rear.
Note: You can place a rotisserie kit on the back of grill. The
rotisserie kit is not included in this unit's mass production.
Flame tamers, cooking grids, and warming rack for
main burner installation
1. Place the flame tamers, cooking grids, and warming rack into
the grill as shown in the below picture.
16
Flame tamer and cooking grid for side burner installation
1. Place the flame tamer and cooking grids into the
grill as shown in below picture.
Connect the main burner grill and side burner grill
1. Place the locking bar onto the bracket.
2. When the locking bar is on the bracket, rotate the
locking bar clockwise. The two parts will be connected.
locking bar clockwise The two parts will be connected
Rotate the locking bar counterclockwise. The two parts will be
separated.
Note: The locking bar is fixed on the side burner grill cross-bar,
and the bracket is fixed on the main burner grill cross-bar.
A
A. Bracket
B. Cross-bar
A
B
Publicité
Table des Matières
