Miele Complete C1 Mode D'emploi page 36

en
Exhaust filter change indicator
The exhaust filter change indicator
shows the remaining functional life of
the exhaust filter. After approx. 50 oper‐
ating hours, or approx. one year of
average use, the display will be com‐
pletely filled with red (dia. 14).
Using the accessories sup‐
plied (dia. 16)
 Crevice nozzle
 Dusting brush
 Upholstery nozzle
To open the accessories compart‐
ment (dia. 17)
 Press the release button to open the
accessories compartment lid.
 Take out the accessory you require.
 Press down firmly on the lid to close
it.
Standard adjustable floorhead
(dia. 18)
For general use and also for vacuuming
the stairs.

For safety reasons when vac‐
uuming stairs it is best to start at the
bottom of the stairs and move up‐
wards.
Use
To rewind the cable (dia. 20)
 Switch off at the wall socket and re‐
move the plug.
36
 Press the rewind foot switch. The
cable will rewind automatically.
To switch on and off (dia. 21)
 Press the On/Off foot control .
To regulate the suction power
(dia. 22)
The suction power can be regulated to
suit the type of flooring being cleaned.
Reducing the suction power reduces
the amount of effort required to ma‐
noeuvre the floorhead.
The vacuum cleaner has symbols on
the controls which indicate the type of
use the settings are suitable for.
 Curtains, fabric
 Upholstery, cushions
 Cut pile carpets, rugs and run‐
ners
 Energy-saving vacuuming. This
setting is also very quiet
 Loop pile carpet and rugs
 Hard flooring and heavily soiled
carpets and rugs
 Turn the suction power selector ma‐
nually to the suction power setting
you require.
To open the air inlet valve (dia. 23)
It is easy to reduce the suction power
for a short time, e.g. to prevent rugs or
other objects being sucked into the
vacuum cleaner.
 Open the air inlet valve on the handle
far enough to reduce the suction
power.