LD Systems WS1000G2 Manuel D'utilisation page 16

SYSTEM SETTINGS:
ASC (frequency synchronisation via infrared)
The transmission frequency of a wireless system has to be the same in both transmitter and receiver.
Once a specific frequency (group and channel) has been selected, the transmitter (handheld or bodypack) has to
be synchronized to the same frequency (group and channel) via the ASC function.
1
Push the ASC button on the receiver (the ASC symbol in the display blinks), switch on the transmitter and hold
2
it with its infrared interface facing direct to the infrared interface of the receiver in a distance between 5 and
20 cm (within 10 seconds after switching the transmitter on). After a short moment the synchronisation process
3
is done and the RF signal level meter of the receiver indicates a signal.
1
2
2
3
16