Securing Your Child - Britax B-SAFE 35 Elite Guide D'utilisation

BRITAX Child Safety, Ltd.

Securing Your Child

1. Ensure that you have
followed all instructions for
adjustment of the harness
and buckle into the correct
position for your child. See
page 30.
2. Loosen the harness by
pressing down the harness
adjuster button while
pulling both harness straps
forward.
3. Press the tab and pull
apart the two halves to
release the chest clip.
4. Release the buckle and
attach the harness straps
to the harness holders.
26
5. Place the child in the infant
car seat as shown. Ensure
the child is positioned
upright in the infant car seat
and not slouching. Their
bottom and back must rest
flat against the infant car
seat.
6. Position the harness straps
around the child.
IMPORTANT: Remove
bulky coats and/or
jackets before putting the
child in the child seat.
7. Buckle the harness.
* Connection is confirmed
with an audible click
after inserting each
buckle tongue.
* Always pull on the
buckle to ensure it is
properly connected.
B-SAFE 35 ELITE User Guide
Slouching
Sitting Up
27