Testing The Battery; Operating The Lawn Mower; Holding And Controlling The Mower; Adjusting Cutting Height - Stihl RMA 460 Notice D'emploi

English
– Thickness 'a'
– Width 'b'
– Sharpening angle 'c'
► If the minimum thickness and minimum width are outside
the specified limits: Replace the blade, @ 21.2.
► If the filing angle is not correct: Sharpen the blade,
@ 21.2.
► If you have any queries: Contact a STIHL servicing dealer
for assistance.

12.3 Testing the Battery

► Press button on battery.
The LEDs glow or flash.
► If the LEDs do not glow or flash: Do not use the battery
and contact your STIHL servicing dealer.
There is a malfunction in the battery.

13 Operating the Lawn Mower

13.1 Holding and Controlling the Mower

► Hold the handle firmly with both hands and wrap your
thumbs around the handle.
20

13.2 Adjusting Cutting Height

Seven cutting heights can be selected to suit the application:
– 35 mm = Position 1
– 50 mm = Position 2
– 63 mm = Position 3
– 74 mm = Position 4
– 83 mm = Position 5
– 90 mm = Position 6
– 98 mm = Position 7
1
The positions are marked on the mower.
► Pull the lever (1) out of the notch and move it to the
required position.

13.3 Switching on ECO Mode

When the ECO mode is switched on, the mower detects the
current operating conditions and automatic selects the most
suitable cutting blade speed.
This helps extend the battery runtime.
13 Operating the Lawn Mower
0458-796-9921-B