Fitting And Removing The Grass Box; Fitting And Removing The Mulch Plug; Fitting And Removing The Chute - Stihl Rma 460 Notice D'emploi

English
The handlebar must not be dismantled again.
7.2

Fitting and Removing the Grass Box

7.2.1 Fitting the Grass Box
► Switch off the mower, remove the activation key and
battery.
► Place the mower on a flat surface.
► If the side chute is still in place: Remove the chute.
► If the mulch plug is still in place: Remove the mulch plug.
1
► Open the discharge shield (1) and hold it in position.
► Hold grass box (2) by the handle (3) and engage the
hooks (4) on the rod (5).
► Rest the discharge shield (1) on the grass box (2).
7.2.2 Detaching the Grass Catcher Box
► Switch the lawn mower off.
► Place the lawn mower on a level surface.
► Open the discharge flap and hold it open.
► Remove the grass catcher box upwards by the handle.
► Close the discharge flap.
7.3

Fitting and Removing the Mulch Plug

7.3.1 Fitting the Mulch Plug
► Switch off the mower, remove the activation key and
battery.
14
► Place the mower on a flat surface.
► Open the discharge shield (1) and hold it in position.
5
► Hold the mulch plug (2) by the grip (3) and fit it in the
discharge duct (4).
► Close the discharge shield (1).
4
7.3.2
3
► Switch off the mower, remove the activation key and
battery.
2
► Place the mower on a flat surface.
► Open the discharge shield and hold it in position.
► Remove the mulch plug.
► Close the discharge shield.
7.4
7.4.1
► Switch off the mower, remove the activation key and
battery.
► Place the mower on a flat surface.
7 Assembling the Lawn Mower
1
Removing the Mulch Plug

Fitting and Removing the Chute

Fitting the Chute
2 3
4
0458-796-9921-B