Initial Start-Up - Häfele DT 210 R2 Instructions D'utilisation

5. Start-up

5.1 Initial start-up

6. Allocating locking authorisation
• The operator,
• The installation and start-up personnel.
After these groups of people have read chapters 1 - 3 of these operating instructions,
they should now obtain and read the separate "Installation instructions" document
for installation purposes.
The product is supplied in so-called "simple mode" for stand-alone operation (SA).
These instructions only describe how to start up in this mode.
• Details of use of the product with software applications (Dialock HOTEL,
PERSONNEL, Hotel Management Systems etc.) can be found in the relevant
software documentation.
The work operations only need to be carried out once during initial start-up. The
individual work operations must be carried out within a short time window. Therefore:
• First study every work operation and have the keys that are needed at the ready
before commencing with initial start-up.
• Perform the work operations quickly and without interruptions.
For step-by-step instructions "Start-up" see
illustrations starting on page 42.
NOTE
Warning of abuse!
Unauthorised persons can gain access to rooms using the
programming and clearing keys.
> Only personnel who are authorised by the operator may
allocate locking authorisations!
> Take care when allocating locking authorisations to avoid
overlapping or mistakes.
> Keep programming and clearing keys in a safe place and
protect from abuse.
Locking authorisations for user keys can be allocated in 3 different categories:
• Normal user keys
All doors to which the user key has locking authorisation can be opened with
these user keys. The locks lock again automatically after 3 seconds. Doors with
the "do not disturb" function activated cannot be opened.
For step-by-step instructions "Allocating locking
authorisation - normal user keys" see illustrations
starting on page 43.
13