Dovre VIRTUS 50GA Installation Et Mode D'emploi page 62

Day and time settings
1. ALL starts blinking. Use the
choose between, ALL, SA: SU, 1, 2, 3, 4, 5, 6, 7
2. To confirm, press the [programme] key.
3. ON appears and the hour symbol starts blinking.
Use the and keys to select the hour for the
ON time.
4. To confirm, press the [Programme] key,
5. ON appears and the minutes start blinking. Use
the and keys to select the minutes for the
ON time.
6. To confirm, press the [Programme] key.
7. OFF appears and the hour symbol starts blink-
ing. Use the and
the OFF time.
8. To confirm, press the [Programme] key,
9. OFF appears and the minutes start blinking. Use
the and keys to select the minutes for the
OFF time.
10. To confirm, press the [Programme] key.
D OVRE
24
09-20021-389
and keys to
keys to select the hour for
11. Where relevant, continue to define the settings
for Programme 2 or stop here to keep Pro-
gramme 2 on non-active.
12. Programme 1 and 2 use the same ON and OFF
temperature settings. As soon as a different tem-
perature is chosen in the Thermostatic mode,
this is the standard value for the temperature in
Programme mode
Double burner
ON: Press the [double burner] key to switch on the
back burner; the symbol appears on the display.
OFF: Press the [double burner] key to switch off the
back burner; the symbol disappears from the display.
The valve for the second burner cannot be operated
manually. If the batteries of the remote control or the
receiver are empty, the second burner stays in its last
position.
Subject to change because of technical improvements
09-20021-390