Hitachi WH 12DM2 Instructions De Sécurité Et Mode D'emploi page 11

2. Battery Charger
Pilot Lamp
Cord
<UC14YF2>
SPECIFICATIONS
1. Cordless Impact Driver
Model
No-load speed
Capacity
Tightening torque
Bit shank size
Rechargeable
battery
Weight
Battery
Installation Hole
Caution Plate
Body
Nameplate
WH9DM2
(9.6 V)
0 – 2800/min
5/32" – 5/16" (M4 – M8) (Small screw)
3/16" – 15/32" (M5 – M12) (Ordinary bolt)
3/16" – 3/8" (M5 – M10) (High tension bolt)
Maximum 710 in-lbs.
{80 N·m 820 kgf·cm}
Tightening is 15/32" (M12) high
tension bolt, when fully
charged at 68°F (20°C) temp.
Tightening time: 3 sec.
EB9B (2.0 Ah)
Ni-Cd battery, 9.6 V
Charging and discharging
frequency: about 1000
2.6 lbs. (1.2 kg)
Pilot Lamp
Caution Plate
Nameplate
<UC14YFA>
Fig. 2
Maximum 1190 in-lbs.
Tightening is 9/16" (M14) high
tension bolt, when fully
charged at 68°F (20°C) temp.
Tightening time: 3 sec.
1/4" (6.35 mm) Hex.
Charging and discharging
Battery
Installation Hole
WH12DM2
(12 V)
0 – 2600/min
{135 N·m 1375 kgf·cm}
EB1220BL (2.0 Ah)
Ni-Cd battery, 12 V
frequency: about 1000
3.5 lbs. (1.6 kg)
English
11